Home  >  3D Printers  >  The CREATE Education Project
The CREATE Education Project

The CREATE Education Project

4.8/5

The CREATE Education Project

About
Pricing
Compare
Reviews
Alternatives

Top Rated Alternatives

What is The CREATE Education Project?

The CREATE Education Project was set up in 2014 with one aim - to support educators in bringing 3D printing and additive manufacturing technologies to young people, giving them industry skills to succeed in a rapidly expanding high-quality careers market. Additive manufacturing technologies encompass: 3D printers, 3D design, 3D scanning, 3D forming.

We work exclusively within the education sector, supporting schools, colleges and Universities and aim to bridge the gap between industry and education, breaking down barriers to allow young people and educational organisations to gain 3D printing and additive manufacturing skills from Key Stage 1 to Key Stage 5. We further support Universities with their undergraduate and postgraduate courses as well as their ongoing research and development.

How we do this?

Community - We work in partnership with industry and education to ensure the advice and technology we offer are cutting edge.

Reliability - All products have been tested to ensure they are easy to use, simple to maintain, and cost-effective. We are the preferred UK education resellers for Mayku, Meltio, and Ultimaker.

Education - We believe in the power of education to transform, and supply our customers with the best use and best practice technology.

Accessibility - Our mission is to allow everyone a chance to develop the necessary career skills to seed innovation.

Teachability - The tackle the challenge of introducing any new technology into the classroom embed it effectively.

Economy - We do not believe that money should stand in the way of accessibility. We also offer a low cost loan scheme so that educators can try our technology before they buy.

Educational Impact

improve teacher knowledge
95%
increase student collaboration
92%
build student knowledge
89%
improve teaching efficiency
80%
improve attainment
68%

Additional evidence

Sep 2022

Inspiring Lancashire Mid Term Report

Download case study
CompanyBusiness Name: The CREATE Education Project
HQ Location: United Kingdom
Founded: 2014
Age Range5-7, 8-10, 11-13, 14-16, 17-18, 19+
FeaturesFree Lifetime SupportSupport On 3d Printing Lesson Ideas 3d Printing Resources 3d Printing Lesson Ideas 3d Scanning Lesson Ideas 3d Resources Webinars 3d Printing Webinars 3d Software3d Design Software 3d Design WebinarsTechnology Loan3d Printer Loan Low Cost 3d Printer Low Cost 3d Scanner Low Cost Vacuum Former Cpd Teachers Cpd Education Workshops Primary Workshops Secondary 3d Printing Support3d Printing Webinars 3d Printing Secondary 3d Printing Primary3d Printing Further Education 3d Printing T Level 3d Printing University 3d Printing Higher Education
LanguagesEnglish
AccessibilityFew to no features
PoliciesTerms of ServicePrivacy Policy
RequirementsAvailable OfflineInternet - Low BandwidthInternet - High BandwidthDesktop - MacDesktop - WindowsDesktop - Linux
Set Up

20 - 30 minutes for the most basic 3D printers and 3D scanners and less for vacuum formers! We offer a 1 hour free Zoom set up with all 3D printer hardware purchases. Our technical expert will help you from unboxing to completing your first print.

TrainingIn PersonWebinarsDocumentationVideos

We run four introductory webinars on a rolling 4 week programme. You can register for these here: createeducation.com/webinar/

We also offer CPD for staff and student workshops at a very reasonable price. We offer these for half a day or a full day. Please get in touch for more information.

SupportEmailKnowledge BasePhone Support

We offer a free lifetime support for any harware purchased at The CREATE Education Project.

Home Learning

We supply directly to schools, colleges, universities and education organisations.

Tags3d printing3d printer 3d printadditive manufacturing manufacturingengineeringadditive 3d scan 3d scanning 3d scanner STEAMSTEMDesign 3D design 3d designer 3d designs 3d printers3d form vacuum forming vacuum former
Promotional banner - EdTech Impact virtual showcase events for Maths, Science, and EnglishPromotional banner - EdTech Impact virtual showcase events for Maths, Science, and English

The CREATE Education Project Pricing


Pricing Plans

Free VersionFree TrialOne-Off Fee

We aim to make 3D printing accessible to all education organisations. We offer a large range of free resources and webinars as well as free lifetime support for all hardware purchases.

We offer every school, college or university who are looking to start out on their 3D printing or additive manufacturing journey a 30 minute free consultation.

Our low cost technology loan scheme means that for £50 (p&p), plus a fully refundable deposit, schools, colleges and universities, as well as Higher Education students, can loan a 3D printer, 3D scanner or 3D former for 5 weeks. You can find out more and apply here: createeducation.com/loan-scheme

We offer a range of 3D printers, starting from £1,021.62*. exc.VAT. Our cheapest 3D Scanner starts at £869* Exc. VAT and the Mayku FormBox retails on the CREATE Education website for £718.80* Exc. VAT.

We offer great value bundle for 3D printing, 3D scanning and 3D forming to get you everything you need to start your additive manufacturing journey for schools and T Level providers in the click of a button.

Further we offer excellent value CPD training and student workshops, starting at £300* exc. VAT (+ travel expenses) for half a day.

*Prices are subject to change and are correct as of 3rd October 2022.

Compare The CREATE Education Project with...

The CREATE Education Project Reviews

4.8 out of 5

from 40 Verified Reviews

The CREATE Education Project has collected 5 reviews in the past 6 months

User rating

Excellent
34
Great
5
Average
0
Poor
1
Bad
0

Country

The CREATE Education Project
Ed Gilbertson

Teacher

Used The CREATE Education Project daily for 0–3 months

Mar 2024

As a free resource for a very small school with a very small budget, this was invaluable. The children were really engaged with the topic and could talk about it with parents and in school assemblies. All children in upper KS2 were able to participate in the project, designing and making a 3D model they could take home.

Ed Gilbertson found The CREATE Education Project:
  • Significantly increases student collaboration
    Children have been able to work together to create 3D models using CAD software and then print a 3D model.
  • Significantly improves teaching efficiency
    Children have a real life example to see and watch when discussing the workings of a 3D printer.
  • Significantly improves teacher knowledge
    The CPD gave teachers knowledge and skills on how to use a 3D printer but also knowledge about how the subject can be taught at primary school level.
  • Significantly improves attainment
    Children are more engaged with the lessons/topic due to the practical elements and so children's knowledge, understanding and therefore attainment has increased.
  • Significantly builds student knowledge
    A real life example of a 3D printer in use helps children understand in more detail
flag
SHARE:
Share on Linked In
The CREATE Education Project
Joanne Ford

Class teacher

Clayton Brook Primary School, England

Used The CREATE Education Project weekly for 0–3 months

Feb 2024

A fabulous opportunity for our students and staff

Joanne Ford found The CREATE Education Project:
  • Significantly increases student collaboration
    Working together to create designs on Tinkercad
  • Significantly improves teaching efficiency
    Using the designs in teaching
  • Significantly improves teacher knowledge
    Knowledge of how to use Tinkercad and Cura to create 3D prints
  • Significantly improves attainment
    More understanding of the 3D design process
  • Significantly builds student knowledge
    Knowledge of Tinkercad
flag
SHARE:
Share on Linked In
The CREATE Education Project
Karl

Teacher

Sudell Primary School, England

Used The CREATE Education Project daily for 0–3 months

Dec 2023

It's the best thing to happen to my teaching career it is such a good project

Karl found The CREATE Education Project:
  • Significantly increases student collaboration
    The students were engaged during our computing sessions and D.T lessons
  • Significantly improves teaching efficiency
    I was able to show students the importance of timing in lessons due to the length of time it took for the printing to take.
  • Significantly improves teacher knowledge
    I had to do my own research to help my own knowledge to show confidence and encourage student to be confident
  • Significantly improves attainment
    Students were engaged and I was able to centre behaviour around rewards of more computing time linked with tinkercad use.
  • Significantly builds student knowledge
    Students would research their own shapes to make interesting key rings
flag
SHARE:
Share on Linked In
The CREATE Education Project
Rianne Gill

Year 3 class teacher

Used The CREATE Education Project daily for 0–3 months

Dec 2023

Over the moon with the entire process.

Rianne Gill found The CREATE Education Project:
  • Significantly increases student collaboration
    We created poppy badges to design and sell for remembrance.
  • Significantly improves teaching efficiency
    I was able to quickly transfer designs across, without an issue or fuss, the children even asked for more detail about the software and I was able to show and explain.
  • Significantly improves teacher knowledge
    I now know how to slice and 3D print
  • Slightly improves attainment
    I wish I could answer this stronger, we just didn’t have enough time to measure impact within curriculum!
  • Significantly builds student knowledge
    The children (particularly year 6) were interested in the entire process as they said it was something they wanted to practise before going to high school. I was even interviewed about the process by some Year 4s who were publishing it as part of their curriculum Work.
flag
SHARE:
Share on Linked In
The CREATE Education Project
Cindy

Teacher

Pendle Primary School, England

Used The CREATE Education Project occasionally for 4-6 months

Nov 2023

The children enjoyed learning about 3D printing and creating a project

Cindy found The CREATE Education Project:
  • Moderately increases student collaboration
    engagement
  • Moderately improves teaching efficiency
    children on task
  • Slightly improves teacher knowledge
  • Slightly improves attainment
  • Moderately builds student knowledge
    new skill creating a 3D design
flag
SHARE:
Share on Linked In
The CREATE Education Project
Mr M McAvoy

D&T Curriculum leader

Used The CREATE Education Project monthly for 1-2 years

Jul 2023

Very happy

Mr M McAvoy found The CREATE Education Project:
  • Moderately increases student collaboration
    Increased use of additive manufacturing and interest in STEM careers.
  • Moderately improves teaching efficiency
    More confidence in embedding additive manufacturing into our curriculum
  • Significantly improves teacher knowledge
    as previous answer
  • Slightly improves attainment
    Not sure
  • Moderately builds student knowledge
    Yes, as more confidence for teachers will come through into the teaching and on to pupils.
flag
SHARE:
Share on Linked In
The CREATE Education Project
Matthew Smith

Assistant Principal Teacher

Used The CREATE Education Project monthly for 1-2 years

Jul 2023

Excellent help, training and feedback given. A great help.

Matthew Smith found The CREATE Education Project:
  • Moderately increases student collaboration
    Pupils use 3D printing technology as focused exercise in Year 9 and Year 10
  • Slightly improves teaching efficiency
    Resources provided have been used
  • Significantly improves teacher knowledge
    Good traing on 3D Printing technology
  • Slightly improves attainment
    Some GCSE projects incorporate 3D printing.
  • Moderately builds student knowledge
    Look at possible uses of technology
flag
SHARE:
Share on Linked In
The CREATE Education Project
Rachel Moore

Head of Department

Holy Cross High School, England

Used The CREATE Education Project daily for 3-4 years

Jul 2023

Rachel Moore found The CREATE Education Project:
  • Moderately increases student collaboration
    Working together in groups to solve problems and develop desing solutions
  • Slightly improves teaching efficiency
  • Significantly improves teacher knowledge
  • Slightly improves attainment
  • Moderately builds student knowledge
flag
SHARE:
Share on Linked In
The CREATE Education Project
Thomas Cousins

Classroom teacher

Pendle Primary Academy, England

Used The CREATE Education Project weekly for 0–3 months

Jul 2023

Reply from The CREATE Education Project:Thank you so much for your review!
Thomas Cousins found The CREATE Education Project:
  • Significantly increases student collaboration
    Engagement with the content of the lesson.
  • Slightly improves teaching efficiency
  • Significantly improves teacher knowledge
    Access to resources and training documents.
  • Slightly improves attainment
  • Significantly builds student knowledge
    Supporting documents
flag
SHARE:
Share on Linked In
The CREATE Education Project
Lisa Gornall

Teacher

Used The CREATE Education Project occasionally for 7–12 months

Jul 2023

Reply from The CREATE Education Project:Thank you Lisa for your review! It is appreciated!
Lisa Gornall found The CREATE Education Project:
  • Significantly increases student collaboration
  • Significantly improves teaching efficiency
  • Significantly improves teacher knowledge
  • Does not significantly improve attainment
  • Moderately builds student knowledge
flag
SHARE:
Share on Linked In
The CREATE Education Project
Gareth Dyer

Teacher/ Computing Lead/ DT Lead

Used The CREATE Education Project weekly for 4-6 months

Jan 2023

I have already recommended them to anyone who would listen! They have influenced our computing and DT already - so much that we have invested in 2x 3D printers because of it, and rewritten our curriculum to ensure all children and teachers from EYFS to Year 6 can learn about 3D modelling and 3D printing. The loan of the printer is just the start - the follow up resources, and the clear and personal guidance, were incredible.

Reply from The CREATE Education Project:Hi Gareth, thank you so much for your review and for spreading the word about The CREATE Education Project! We hope we can support you for many years to come!
Gareth Dyer found The CREATE Education Project:
  • Significantly increases student collaboration
    The children worked collaboratively to create products using 3D modelling, on lessons provided by CREATE education, which they then built with the 3D printer loaned to us by CREATE Education
  • Significantly improves teaching efficiency
    Firstly, the lesson plans provided were detailed yet easy to follow, as were the resources. More than this, however, the guidance on how to set up the 3D printer, especially to a novice like myself, was invaluable and saved time.
  • Significantly improves teacher knowledge
    The guidance provided on how to set up and run a 3D printer efficiently was absolutely invaluable, and the personal support that I received, either over the phone, or Whatsapp etc, was incredible. I went from having no idea about 3D printing to teaching 3D modelling with confidence.
  • Significantly improves attainment
    Not only in computing, but also in DT, the CREATE Education materials helped us to reach curriculum objectives which previously have been hard to hit for a Primary School.
  • Significantly builds student knowledge
    A student voice survey showed that 100% (over 120 pupils) that took part in learning through the CREATE Education materials learned a lot about 3D printing, and could specify areas of knowledge that had developed (modelling, understanding limitations of 3D printing etc).
flag
SHARE:
Share on Linked In
The CREATE Education Project
Leanne Smyth

Cognitive and Technology Specialist

Cumran Primary School, Northern Ireland

Used The CREATE Education Project occasionally for 0–3 months

Jan 2023

The provision of online training was excellent, Sonya took time at the end to answer questions which I had and there was a follow up email shortly after the session.

Reply from The CREATE Education Project:Thank you so much for the review Leannne! We're glad you enjoyed the webinar and we look forward to supporting you in the future. If you need anything, do get in touch with us at enquiries@createeducation.com
Leanne Smyth found The CREATE Education Project:
  • Significantly increases student collaboration
    Pupils will work collaboratively on ICT projects and it has been great to see how they debug when using code.
  • Moderately improves teaching efficiency
    From the session yesterday, it's great find out about the number of resources which are available and ready to use in the class. This definitely saves time creating lessons and thinking about progression throughout the school.
  • Significantly improves teacher knowledge
    The 3D printing course was excellent, it was delivered using a good pace, it has provided me with a starting board to develop the use of the 3D printer throughout the school from using suitable programs for age level to the suggested progression.
  • Slightly improves attainment
    I now have to develop the use of the 3D printer in school, from the information provided during the training, I know this will definitely impact attainment and provide pupils with the skills, knowledge and understanding in the focused area.
  • Slightly builds student knowledge
    This is the first time I have accessed create education, the materials shared will have a significant impact on student's knowledge.
flag
SHARE:
Share on Linked In
The CREATE Education Project
Nasim

Teacher

Used The CREATE Education Project weekly for 7–12 months

Dec 2022

The brief and the content really allowed me as a teacher to explore clear skills and work collaboratively to allow students to access a project . The design of the project and the adaptability of how it can be taught and delivered

Reply from The CREATE Education Project:Hi Nasim, thank you so much for your review! It's great to hear that the content we provided has really helped you to make an impact with your students! Thanks!
Nasim found The CREATE Education Project:
  • Significantly increases student collaboration
    Students have been collaborating with the guides and the projects that have been given, there has been more real work base style working and communication
  • Moderately improves teaching efficiency
    The projects really established core outcomes that are needed for project based learning and work at GCSE
  • Moderately improves teacher knowledge
    The guides that were provided for the CAD programmes and the communication that was made
  • Moderately improves attainment
    Students wanted to be in the lessons to complete the project work and meet the project demands
  • Significantly builds student knowledge
    Students have understood project work and what requirements are needed as part of meeting a brief demand. They have learnt have to work to a set criteria and elements of workplace standards to analyse, differentiate and explain.
flag
SHARE:
Share on Linked In
The CREATE Education Project
Lucy Watkins

Creative Arts & Technology Technician

Used The CREATE Education Project occasionally for 7–12 months

Dec 2022

The project itself is exciting and makes you wonder the potential of 3D printing and it's future in education. Pupils enjoy getting stuck into projects like this and can be fascinating and rewarding watching their designs get 3D printed. However, I'd say the projects take a huge commitment from the teachers and allocating the time can be difficult. Although, with the right amount of time allocated, it's a great extension to the curriculum.

Reply from The CREATE Education Project:Hi Lucy - thank you so much for your review! We try to make sure we support teachers as much as we can with our wealth of free resources. Why not check them out here: https://www.createeducation.com/resources-landing/
Lucy Watkins found The CREATE Education Project:
  • Moderately increases student collaboration
    Working in teams to design a 3D model or learning from each other when using the OnShape software.
  • Slightly improves teaching efficiency
    The project is broken down into sections so it can be easily translated across to the pupils, the teachers guide with the Inspiring Lancashire project aids with understanding.
  • Significantly improves teacher knowledge
    In person training on 3D printing and software use on OnShape and workshops taken place within the school provides more understanding.
  • Moderately improves attainment
    I think bringing their design to life through 3D printing, brings them a sense of achievement that they created that!
  • Significantly builds student knowledge
    In the workshops and through implementing it into parts of our technology classes, they are understanding that 3D printing is an avenue they can take to bring a design into a physical form oppose to other materials like wood or acrylic.
flag
SHARE:
Share on Linked In
The CREATE Education Project
Nichola Hallas

Subject Leader of D&T

Used The CREATE Education Project weekly for 0–3 months

Nov 2022

The training, by Sonya Horton, was superb. easy to understand and delivered at the right level for a mixture of year 11, novice staff and year 13. Some amazing, useful tips shown. The whole process from drawing to creation on the printers was shown in very easy steps. We have had out machines non-stop running since the training

Reply from The CREATE Education Project:Hi Nichola, thank you so much for your review! We are glad you enjoyed your training!
Nichola Hallas found The CREATE Education Project:
  • Significantly increases student collaboration
    Training was delivered to a mixed group of staff, year 13 and year 11
  • Significantly improves teaching efficiency
    We have been able to get two 3D printers up and running in lessons in 24 hours, due to excellent training by Create Sonya Horton
  • Significantly improves teacher knowledge
    We have been able to teach the training straight away
  • Significantly improves attainment
    The techniques we have been shown hit the higher GCSE and A'leve bands
  • Significantly builds student knowledge
    Pupils could easily set up the printing equipment themselves after the training
flag
SHARE:
Share on Linked In
The CREATE Education Project
Richard Tinston

Teacher

The Hyndburn Academy, United Kingdom of Great Britain and Northern Ireland

Used CREATE Education Project occasionally for 0–3 months

Jul 2022

Engaging project and very applicable to different subjects

Reply from The CREATE Education Project:Thank you for your review.
Richard Tinston found CREATE Education Project:
  • Slightly improves school processes
  • Moderately builds student knowledge
    CAD and CAM
flag
SHARE:
Share on Linked In
The CREATE Education Project
Stephen Hughes

Teacher of IT

Highfield Leadership Academy, United Kingdom of Great Britain and Northern Ireland

Used CREATE Education Project monthly for 4-6 months

Jul 2022

Support given has been helpful

Reply from The CREATE Education Project:Thank you for your 5 stars! We are thrilled that you found the support given helpful!
Stephen Hughes found CREATE Education Project:
  • Moderately improves school processes
    Development of CAD curriculum
  • Moderately builds student knowledge
    Teaching CAD
flag
SHARE:
Share on Linked In
The CREATE Education Project
Matthew Smith

Teacher

Our Lady's Catholic High School, United Kingdom of Great Britain and Northern Ireland

Used CREATE Education Project occasionally for 5 years+

Jul 2022

One educator was more impactful

Reply from The CREATE Education Project:Thank you for your review Matthew!
Matthew Smith found CREATE Education Project:
  • Slightly improves school processes
    Year 8 have a better awareness of Industry
  • Moderately builds student knowledge
    Year 8 have a better awareness of Industry
flag
SHARE:
Share on Linked In
The CREATE Education Project
Mr J Patel

Teacher of DT

Moor Park High School and Sixth Form, United Kingdom of Great Britain and Northern Ireland

Used CREATE Education Project weekly for 0–3 months

Jul 2022

Very informative, structured and approachable

Reply from The CREATE Education Project:Thank you for your kind words! We are glad you found the CPD informative.
Mr J Patel found CREATE Education Project:
  • Moderately improves school processes
    better understanding of the 3D print environment
  • Moderately builds student knowledge
    In the use of software
flag
SHARE:
Share on Linked In
The CREATE Education Project
Stephen Hughes

Teacher of IT

Highfield Leadership Academy, England

Used CREATE Education Project occasionally for 0–3 months

Feb 2022

Excellent support and materials

Stephen Hughes found CREATE Education Project:
  • Moderately improves school processes
    Forming part of the curriculum
  • Moderately builds student knowledge
    Education around 3D printing
flag
SHARE:
Share on Linked In
The CREATE Education Project
Neil Hodgson

CL for Design Technology & Engineering

St Augustine's High School, England

Used CREATE Education Project monthly for 3-4 years

Dec 2021

This programme has had a substantial commitment by industry to enable schools across Lancashire to include 3D additive manufacturing in the curriculum with a hands on approach and 3D printer to complement the learning of CAD/CAM. The Create team are producing excellent resources with first class support to assist teachers in the delivery of these future digital skills.

Neil Hodgson found CREATE Education Project:
  • Significantly improves school processes
    Create education have helped me to deliver the Engineering Systems syllabus at KS4 since I started the course 3 years ago. The 3D printer and the tools available to support the delivery of the learning of CAD CAM are so relevant to the modern engineering factory model.
  • Significantly builds student knowledge
    The knowledge unlocked by the additive manufacturing process enables me to deliver the curriculum in full and this additional programme gives the capacity to include KS3 which both prepares and educates the pupils as part of my 5 year plan for technology.
flag
SHARE:
Share on Linked In
The CREATE Education Project
Sarah Zaman

Outreach manager

Computing at School, England

Used CREATE Education Project month for 5 years+

Jul 2021

I find Create Education supportive in terms of up skilling colleagues on the use of 3D printing and associated software

Sarah Zaman found CREATE Education Project:
  • Significantly improves school processes
  • Significantly builds student knowledge
    Knowledge of Computer Aided Design for cross curricular projects
flag
SHARE:
Share on Linked In
The CREATE Education Project
Jack Cockle

Masters Student

Used CREATE Education Project for 1-2 years

Jun 2021

The CREATE Education team are an extremely helpful and friendly bunch, have supported me a lot throughout the past couple of years and offer great services.

Jack Cockle found CREATE Education Project:
  • Significantly builds student knowledge
  • Significantly improves teacher knowledge and skills
  • Significantly improves school processes
    Enabling exposure to a variety of 3D printing tech
flag
SHARE:
Share on Linked In
The CREATE Education Project
Lubo

Digital Learning Lead

Used CREATE Education Project for 4-6 months

Jun 2021

Extremely engaging, well pitched workshops for the children to explore and use the skills that were modelled.

Lubo found CREATE Education Project:
  • Significantly builds student knowledge
    Our children were able to explore and really understand what 3D modelling is and its impact on our world today and the future. The classes were able to put into context what a 3D plane is and how to manipulate it for their modelling. The sessions were able to address Information Technology by using the mouse correctly to navigate the software.
  • Significantly improves teacher knowledge and skills
    At the start of the session none of the teachers were aware of the software or how applicable it can be to the national curriculum, especially with design and technology. By the end of the session we were all confident and are now able to teach it efficiently to our classes.
  • Slightly improves school processes
    With access to 3D printers, we are now thinking creatively on our resources. Story time in reception has been enhanced with the printing of the Gruffalo, our Year 5 space projects have involved the classes constructing a 3D model of a space rocket and designing their own. These would not be possible without the 3D printing and the software that we explored during a Create Education Workshop.
flag
SHARE:
Share on Linked In
The CREATE Education Project
Kelly

Teacher

Used CREATE Education Project for 0–3 months

Mar 2021

Create Education provided an excellent 1 day online course provided by Sonya. She was able to guide up through the use of the Ultimaker 2 go 3D printer so that we had the confidence to set it up and use it with our class. She provided lots of great resources and practical ideas that could be used in class.

Kelly found CREATE Education Project:
  • Significantly builds student knowledge
    Providing students with the knowledge and skills for CAD and 3d printing.
  • Significantly improves teacher knowledge and skills
    Create provided an excellent starting point to launch CAD and 3d printing in our school.
  • Significantly improves school processes
    Ability to implement the knowledge into the DT and computer curriculum.
flag
SHARE:
Share on Linked In
Previous
1
2
Next
The CREATE Education Project Categories
Last updated 29th March 2024
Promotional banner - EdTech Impact virtual showcase events for Maths, Science, and EnglishPromotional banner - EdTech Impact virtual showcase events for Maths, Science, and English